Extreme
Pressure, Extended Drain Automotive Gear Oil
Premium performance, multipurpose automotive EP gear lubricant,
also suitable for many industrial applications. Formulated with
ISOSYN™ technology, a
combination of special base oils and unique EP additive system incorporating
inorganic borate technology, to provide oil life and wear protection
far exceeding conventional gear oils under extreme service conditions.
APPLICATIONS
• Automotive differentials operating in severe service conditions.
Particularly
recommended for heavy-duty road transport axles exposed to extreme
loads and temperatures
• Heavy-duty transmissions where the manufacturer recommends
the use of API GL-5 or MT-1 gear lubricants
• Extended drain gear oil applications in on-road and off-road
heavy-duty
equipment
• In-service top up of limited slip differentials
• Industrial gear sets and bearings where EP type gear lubricants
of this
viscosity are recommended
PERFORMANCE
STANDARDS
• API GL-5, GL-4
• API MT-1
• SAE J2360 (former MIL-PRF-2105E)
• Dana Spicer approved (SHAES256) for extended drain service
• Roadranger E500TM approved for drive axle extended drain
• ArvinMeritor O-76 approved (bulletin TP-9539) for extended
drain (SAE 80W-90)
• Mack GO-J and GO-J Plus approved for extended drain (SAE
80W-90)
ENVIRONMENT,
HEALTH and SAFETY
Information is available on this product in the Caltex Material
Safety Data
Sheet (MSDS) and Caltex Customer Safety Guide. Customers are encouraged
to review this information, follow precautions and comply with laws
and regulations concerning product use and disposal. To obtain a
MSDS for this product, visit
www.caltexoils.com.
BENEFITS
Minimizes fleet maintenance costs
Unique borate additive system significantly reduces friction, resulting
in
cooler operating temperatures, reduced wear and longer life of bearings
and
seals.
Minimizes
fleet operating costs
Outstanding thermal and oxidation stability extends oil drain capability
to more than twice the length of conventional gear oils, even under
extreme service
conditions. Special low friction properties contribute to reduced
fuel
consumption.
Extends
equipment life
Patented borate EP technology creates an anti-wear film 3 to 5 times
thicker
than conventional EP additives, providing exceptional protection
and longer gear life.
Wide temperature range application
Excellent low temperature flow properties and high temperature stability
provide gear and bearing protection under a wide range of operating
conditions.
KEY
PROPERTIES
SAE Grade 80W-90 85W-140
Pour
Point: °C -33 to +15
Viscosity:
- mm²/s
@ 40°C 140, 341
-
mm²/s @ 100°C 14.2, 25.0
Viscosity
Index 99 95
Timken OK Load-kg, 29.5-29.5 |
